Suction And Pressure Of Fuel Injection Pump

May 15, 2020 Leave a message

The oil suction and pressure of the fuel injection pump are completed by the reciprocating movement of the plunger in the plunger sleeve.


When the plunger is in the lower position, the two oil holes on the plunger sleeve are opened, and the inner cavity of the plunger sleeve is communicated with the oil passage in the pump body, and fuel is quickly filled into the oil chamber.


When the cam hits the roller of the roller body, the plunger rises. Move upward from the beginning of the plunger until the oil hole is blocked by the upper end of the plunger. During this period of time, due to the movement of the plunger, the fuel is squeezed out of the oil chamber and flows to the oil passage.


So this period of lift is called pre-stroke. When the plunger blocks the oil hole, the oil pressure process begins. As the plunger moves upward, the oil pressure in the oil chamber rises sharply.


When the pressure exceeds the spring force of the delivery valve and the upper oil pressure, the delivery valve is opened, and the fuel is pressed into the fuel pipe and sent to the fuel injector.

R205-24-410A-AB

Send Inquiry

whatsapp

Phone

E-mail

Inquiry