①Spool valve: It is a three-position three-way valve, which consists of a spool and a sliding sleeve, which can move relative to each other. The movement of the valve core is balanced by the primary piston and secondary piston at the right end of the valve core and the spring at the left end of the valve core. The movement of the sliding sleeve is controlled by the swash plate piston, and moves with the movement of the swash plate piston, and its moving distance and direction are consistent with the swash plate piston.
②Secondary piston: In the state of electronic control, the pilot secondary oil flow alone controls the secondary piston. The negative flow does not participate in direct control. Instead, the negative pressure sensor collects its pressure parameters and provides them to the computer, which is calculated as the control circuit. A parameter of the proportional valve current controls the pilot secondary oil flow; in the hydraulic control state, the pilot secondary oil flow is cut off by the liquid-to-electric control valve, which does not participate in the control of the secondary piston, and the negative flow alone controls the secondary piston Take direct control. The working direction of the secondary piston is to push the spool valve spool to move to the left, and it is balanced by its own spring return.
③First-stage piston: controlled by the front pump oil flow, the rear pump oil flow and the pilot primary oil flow (only in the hydraulic control state). Its working direction is to push the spool valve core to move to the left and return by its own spring. , Constitute a balance.






