
The vulcanization reaction of two-component room temperature vulcanized silicone rubber does not rely on moisture in the air, but on catalysts.
Usually, the rubber and catalyst are packaged as one component separately. Only when the two components are completely mixed does curing begin to occur. The vulcanization time of two-component condensation type room temperature vulcanized silicone rubber mainly depends on the type, amount, and temperature of the catalyst. The more the amount of catalyst, the faster the vulcanization, and the shorter the shelf time. At room temperature, the shelf time is generally a few hours. If you want to extend the shelf time of the rubber compound, you can use the cooling method. It takes about one day for the two-component condensation type room temperature vulcanized silicon rafter rubber to fully cure at room temperature, but it only takes 1 hour at a temperature of 150°C. Using accelerators for synergistic effects, the curing speed can be significantly increased. Two-component room temperature vulcanized silicone rubber can maintain long-term elasticity within a temperature range of 65 to 250 ℃, and has excellent electrical properties and chemical stability, resistance to water, ozone, and weathering. In addition, it is simple to use and has strong process applicability. Therefore, it is widely used as potting and molding materials. Various electronic and electrical components are coated and potted with room temperature vulcanized silicone rubber, which can protect against moisture (anti-corrosion, shock resistance, etc.). It can improve performance and stabilize parameters. Two-component room temperature vulcanized silicone rubber is particularly suitable for deep filling. The sealing material has a faster vulcanization time, which is better than one-component room temperature vulcanized silicone rubber. Two-component room temperature vulcanized silicone rubber has excellent anti-stick performance after vulcanization, and the shrinkage rate is very small during vulcanization. Therefore, it is suitable for making soft molds for casting epoxy resin, polyester resin, polystyrene, polyurethane, vinyl plastic, paraffin, low melting point alloy, etc. In addition, it uses two-component room temperature vulcanized silicone rubber The high simulation performance can replicate various exquisite patterns on cultural relics. Pay attention to the use of two-component room temperature vulcanized silicone rubber: first weigh the rubber and catalyst separately, and then mix them in proportion. The mixing process should be handled carefully. Minimize the amount of entrapped gas. After the rubber material is mixed (even color), the bubbles can be removed by standing or depressurizing (vacuum 700 mmHg), after all the bubbles are discharged, at room temperature or at a specified temperature Place it down for a certain period to vulcanize into silicone rubber.





