The Method of PVC Printing

Aug 13, 2021 Leave a message

The Method of PVC Printing


      PVC ink printing is currently the most matured method.


      A. Due to the drying problem, there are two drying methods: cut a single sheet and put it on the shelf to dry. This method takes a long time to dry, covers a large area, and is easy to smudge. For laminating, wrap the undried ink between the films. Take care to avoid laminating on the publication to prevent the failure of laminating.


      B. PVC ink embossing

      This method has good printing quality and high efficiency. It is the most developed and most suitable printing process in China. Since domestic embossing equipment generally does not have UV devices, film printing is limited, so equipment renewal and transformation are necessary conditions for printing films.


      C. Solvent ink flex printing

      This is a traditional printing method with good quality. Due to the low surface tension of the solvent ink, the requirements for the surface tension of the film are not as strict as other inks, so the ink layer is strong, and the process is relatively simple. However, solvents affect the environment and are harmful to the human body and are a printing method that is about to be phased out.


      D. Water-based ink flex printing

      This is the most advanced printing method in the world today, with low cost, good quality and no pollution. However, the process requirements are strict, the surface tension of the film must be above 40 dynes, and there are strict requirements on the pH value and viscosity of the ink. This process has been developed vigorously in China, but it has been slow to develop due to equipment limitations.

      

      E. PVC ink flex printing

      The characteristics are the same as UV embossing, and the cost is high, but the requirements on the surface tension of the film are relatively less stringent. Generally, manufacturers use water-based inks for printing, and UV coating can reduce costs and increase printing effects.


      F. PVC ink screen printing

     This new process can be printed on a single sheet or on a roll, with high cost and good quality. Single-sheet printing does not need to be put on the shelf to dry, and roll printing can be performed at high speed.


      G. Solvent ink screen printing.

      This is a traditional process, generally single sheets are printed by hand, and web materials are printed by linkage. More than 95% is single-sheet printing, with good effect and low cost. But the solvent screen-printing ink is harmful to the human body and pollutes the environment.


      H. PVC offset printing ink

      Because the glue uses resin ink, ordinary offset printing cannot print films. Some manufacturers use single sheet overprinting when printing PVC, drying on the shelf, and finally laminating.


      I. Gravure printing

      Gravure printing rarely prints stickers, but the printing quality is the best among all printing methods, and it is a potential printing method. If the post-printing process is solved in China, the existing equipment can print high-quality self-adhesive labels.


      J. Combination printing, also known as compound printing, is the most advanced printing      method in the packaging and printing industry in the world.

      

      According to different pattern designs, several methods are used to print on the same pattern to achieve the best visual effect. This type of equipment is very common abroad.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry