
Polyethylene was synthesized by the British ICI Company in 1922. In 1933, the British Benemen Chemical Industry Company discovered that ethylene can be polymerized to form polyethylene under high pressure. This method was industrialized in 1939 and is commonly known as the high-pressure method. In 1953, K. Ziegler of the Federal Republic of Germany discovered that with TiCl4-Al(C2H5)3 as a catalyst, ethylene can also be polymerized under lower pressure. This method was put into industrial production by the Federal German Hearst Company in 1955, and is commonly known as low-pressure polyethylene. In the early 1950s, the Phillips Petroleum Company of the United States discovered that ethylene could be polymerized to produce high-density polyethylene under medium pressure using chromium oxide-silica-alumina as a catalyst, and industrial production was realized in 1957. In the 1960s, DuPont of Canada began to manufacture low-density polyethylene with ethylene and α-olefin solution method. In 1977, Union Carbide and The Dow Chemical Company used low-pressure methods to make low-density polyethylene, called linear low-density polyethylene. Among them, the gas phase method of Union Carbide is the most important. The performance of linear low-density polyethylene is similar to that of low-density polyethylene, but it also has several characteristics of high-density polyethylene. In addition, it has low energy consumption in production, so it develops extremely rapidly and becomes one of the most eye-catching new synthetic resins.
The core technology of the low pressure method is the catalyst. The TiCl4-Al(C2H5)3 system invented by Ziegler in Germany is the first-generation catalyst for polyolefins, with low catalytic efficiency, about several kilograms of polyethylene per gram of titanium. In 1963, Solvay in Belgium pioneered the second-generation catalyst with magnesium compounds as the carrier, with a catalytic efficiency of tens of thousands to hundreds of thousands of grams of polyethylene per gram of titanium. The second-generation catalyst can also save the post-treatment process of removing catalyst residues. Later, high-efficiency catalysts for gas phase method were developed. In 1975, Italy's Monte Edison Group developed a catalyst that can directly produce spherical polyethylene without granulation. It is called the third-generation catalyst, which is another revolution in high-density polyethylene production.
Polyethylene is very sensitive to environmental stress (chemical and mechanical effects), and its heat aging resistance is worse than the chemical structure and processing of polymers. Polyethylene can be processed by general thermoplastic molding methods. It has a wide range of uses, mainly used to make films, packaging materials, containers, pipes, monofilaments, wires and cables, daily necessities, etc., and can be used as high-frequency insulating materials for TVs and radars. With the development of petrochemical industry, polyethylene production has developed rapidly, and the output accounts for about 1/4 of the total output of plastics. In 1983, the total production capacity of polyethylene in the world was 24.65 Mt, and the capacity of installations under construction was 3.16 Mt. According to the latest statistics in 2011, the global production capacity reached 96 Mt. The development trend of polyethylene production shows that production and consumption are gradually shifting to the Asian region, and China is becoming the most important consumer market.





