The History of PVC Materials

Jan 22, 2021 Leave a message

As early as 1835, polyvinyl chloride was discovered by V. Leño in the United States. When it is irradiated with sunlight, a white solid, namely polyvinyl chloride, is formed.

PVC was discovered twice in the 19th century, once by Henri Victor Regnault in 1835 and the other by Eugen Baumann in 1872. On both occasions, this polymer appeared in a beaker of vinyl chloride placed under the sunlight as a white solid. At the beginning of the 20th century, Russian chemist Ivan Ostromislensky and German Griesheim-Elektron chemist Fritz Klatte simultaneously tried to use PVC for commercial purposes, but the difficulty was how to process this hard and sometimes brittle polymer.

In 1912, German Fritz Klatte synthesized PVC and applied for a patent in Germany, but failed to develop a suitable product before the patent expired.

In 1926, Waldo Semon of B.F. Goodrich Company in the United States synthesized PVC and applied for a patent in the United States. Waldo Semon and B.F. Goodrich Company developed a method of plasticizing PVC by adding various additives in 1926, making it a more flexible and easier-to-process material, and soon it was widely used in commercial applications.

In 1914, it was discovered that organic peroxides could accelerate the polymerization of vinyl chloride. In 1931, the German method used emulsion polymerization to realize the industrial production of PVC. In 1933, W.L. Simon proposed to use a high boiling point solvent and tricresyl phosphate to heat and mix with PVC, which can be processed into soft polyvinyl chloride products, which made a real breakthrough in the practicality of PVC. The British Benemen Chemical Industry Company, United Carbide Corporation and Goodrich Chemical Company developed the suspension polymerization of vinyl chloride and the processing and application of PVC almost simultaneously in 1936.

In order to simplify the production process and reduce energy consumption, the French Saint-Gobain company developed the bulk polymerization method in 1956. In 1983, the world's total consumption was about 11.1Mt, and the total production capacity was about 17.6Mt; it was the second largest plastic variety after polyethylene production, accounting for about 15% of the total plastic production. China's self-designed PVC production equipment was put into trial production in Liaoning Jinxi Chemical Plant in 1956. The 3kt unit was officially industrialized in 1958, and the output in 1984 was 530.9kt.

PVC was industrialized in the early 1930s. Since the 1930s, for a long period of time, the output of PVC has been ranked first in the world's plastic consumption. In the late 1960s, polyethylene replaced polyvinyl chloride. Although PVC plastics ranks second, but the output still accounts for more than a quarter of the total output of plastics.

Before the 1960s, the production of monomer vinyl chloride was basically based on calcium carbide acetylene. Because calcium carbide production required a lot of electricity and coke, the cost was high. After the industrialization of ethylene oxychlorination to produce vinyl chloride in the early 1960s, countries turned to cheaper petroleum as raw materials. In addition, since most of the raw materials of polyvinyl chloride (approximately 57% by weight) are the by-product chlorine in the soda industry, it is not only a rich source of raw materials, but also one of the most important products for the development of the chlor-alkali industry and the balance of chlorine. Therefore, although the proportion of PVC in plastics has declined, it still maintains a relatively high growth rate.

Polyvinyl chloride plastic products are widely used, but in the mid-1970s, people realized that the monomer vinyl chloride (VCM) remaining in polyvinyl chloride resin and products is a serious carcinogen, which will undoubtedly affect the polyvinyl chloride to a certain extent. The development of vinyl chloride. However, people have successfully reduced the residual VCM through vehicles and other means, so that the content of VCM in the polyvinyl chloride resin is less than 10 ppm, which meets the requirements of sanitary resin and expands the application range of polyvinyl chloride. It can even make the VCM content in the resin less than 5ppm, and the residual VCM after processing is extremely small. Basically harmless to the human body, it can be used as food medicine packaging and children's toys.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry