
Anodized aluminum is a combination of chemical reactions of some chemical elements. In essence, a chemical reaction is produced by a variety of processes such as a coating machine, and the specific operation steps are as follows.
Base film
In China, 16um thick biaxially stretched polyester film is generally used; the main function is to support the coating attached to the top and facilitate the continuous movement of the hot stamping process. This means that the base film layer cannot be deformed due to temperature rise during the hot stamping process, and should have the properties of high strength, tensile strength, and high temperature resistance.
Detachment
Generally, it is mainly coated with silicone resin. The main component of the second release layer in the anodized aluminum foil is silicone resin. Its main function is to make the color, aluminum, and glue layer detach quickly after hot stamping, whether it is heating or before pressing. The film is transferred and bonded to the surface of the hot-stamped object, which means that there is a release layer in the electrochemical aluminum and the composition, and the release layer contains a chemical substance (silicone resin). The main purpose is to help the material transfer well, and the finished hot stamping materials that we have made are mainly used to stamp all kinds of hot stamping materials on various items, and also achieve printing on them. Effect. The main component in the base film layer is (polyester film). It is mainly used to prevent the stretching and changes during the hot stamping process, so that the hot stamping process is intact. The slightest change will not occur due to high temperature. And high strength, high temperature resistance, tensile strength and other properties. The release layer must have better release performance, otherwise it will make the image and text after the hot stamping blurry, showing the bottom of the flower, and affecting the quality of the hot stamping product.
Color layer
The main components of the color layer: synthetic resins and dyes with suitable film-forming properties, heat resistance and transparency.
There are two main functions of the color layer:
1. Display color.
2. Protect the graphics and text of the aluminized layer stamped on the surface of the article from being oxidized. The color of anodized aluminum foil is orange, yellow, gray, red, green, etc. according to needs. The color of the color layer is given luster through the aluminized layer, and the color has a certain change, such as yellow after aluminizing and silvering after aluminizing. The requirement for the coating of the color layer is to be fine and without any small particles, so as to avoid the occurrence of blisters and damage the uniformity of the coating.
Aluminized layer
The aluminizing layer is to place the colored layer and other thin films in the vacuum chamber of the continuous aluminizing machine. Under a certain vacuum degree, through resistance heating, the aluminum wire is melted and continuously evaporated to the color layer of the film to form The main function of the aluminized layer is to reflect light, change the color of the color layer, and make it shiny.
Adhesive layer
The adhesive layer is generally made of fusible thermoplastic resin (there are many kinds) on the aluminum layer through a coating machine and dried to form an adhesive layer. The main function of the adhesive layer is to bond the hot stamping material to the hot object.





