Electroplating is an electrochemical process as well as a redox process. The basic process of electroplating is to immerse the parts in a metal salt solution as the cathode, and the metal plate as the anode. After connecting to the DC power supply, the required deposits are deposited on the parts. Plating. For example, during nickel plating, the cathode is the part to be plated, and the anode is a pure nickel plate. The following reactions occur in the cathode and anode respectively:
Cathode (plating parts): Ni2++2e→Ni (main reaction)
2H++2e→H2↑ (side reaction)
Anode (nickel plate): Ni-2e→Ni2+ (main reaction)
4OH--4e→2H2O+O2 (side reaction)
Not all metal ions can be deposited from the aqueous solution. If the side reaction of the reduction of hydrogen ions to hydrogen on the cathode is dominant, it is difficult for the metal ions to precipitate on the cathode. According to the experiment, the possibility of electrodeposition of metal ions from the aqueous solution, A certain rule can be obtained from the periodic table of elements.
Anodes are divided into soluble anodes and insoluble anodes. Most anodes are soluble anodes corresponding to the coating, such as zinc anode for zinc plating, silver anode for silver plating, tin-lead alloy anode for tin-lead alloy plating, but few electroplating Because the anode is difficult to dissolve, insoluble anodes are used. For example, platinum or titanium anodes are mostly used for acid gold plating. The main salt ions of the plating solution are supplemented by adding a prepared standard gold-containing solution. Chrome anodes use pure lead and lead-tin alloys. Lead-antimony alloy and other insoluble anodes.






