1. Do not hit the glass surface forcefully at ordinary times. To prevent scratches on the glass surface, it is best to lay a tablecloth. When placing things on glass furniture, handle them with care and avoid collisions.
2. For daily cleaning, wipe it with a wet towel or newspaper. If it is stained, you can wipe it off with a towel dipped in beer or warm vinegar. You can also use a glass cleaner on the market. Strong solution for cleaning. The surface of the glass is easy to be frosted in winter, so you can wipe it with a cloth dipped in strong salt water or white wine.
3. Once the patterned ground glass is dirty, you can use a toothbrush dipped in detergent and wipe it in circular motions along the pattern to remove it. In addition, you can also drop some kerosene on the glass or use chalk dust and gypsum powder to moisten the glass and dry it, then wipe it with a clean cloth or cotton, so that the glass is clean and bright.
4. Glass furniture is best placed in a relatively fixed place, do not move back and forth at will; to place objects steadily, heavy objects should be placed at the bottom of the glass furniture to prevent the furniture from overturning due to unstable center of gravity. In addition, avoid dampness, keep away from the stove, and isolate it from acid, alkali and other chemical reagents to prevent corrosion and deterioration.
5. The use of plastic wrap and a damp cloth sprayed with detergent can also "regenerate" the glass that is often stained with oil. First of all, spray the glass with cleaning agent, and then paste the plastic wrap to soften the solidified oil stains. After ten minutes, tear off the plastic wrap and wipe with a damp cloth. To keep the glass bright and clean, you must clean it frequently. If there are handwritings on the glass, rub it with a rubber soak in water, and then wipe it with a damp cloth; if there is paint on the glass, wipe it with cotton and hot vinegar; wipe the glass with a clean dry cloth dipped in alcohol , Can make it as bright as crystal.
Precautions
1. In order to avoid unnecessary losses during transportation, be sure to fix and add soft pads. It is generally recommended to use the erect method for transportation. The vehicle should also be kept stable and slow.
2. If the other side of the glass installation is closed, pay attention to clean the surface before installation. It is best to use a special glass cleaner, and to install it after it is completely dry and it is confirmed that there is no stain. It is best to use clean construction gloves when installing.
3. The installation of glass should be fixed with silicone sealant. In the installation of windows and other installations, it should also be used in conjunction with rubber sealing strips.
4. After the construction is completed, pay attention to attaching anti-collision warning signs. Generally, self-sticking stickers, colored electrical tape, etc. can be used to indicate.
5. Do not bump it with sharp objects.
Wipe the Glass
1. Wipe the glass: first wipe the glass frame clean with a towel, then dip the diluted glass solution with a glass scraper, apply the glass evenly from top to bottom, then repeat the above process, use a glass scraper to scrape clean from top to bottom. Wipe the water marks on the frame with a dry towel. The water marks on the glass must be wiped clean with the glass, otherwise it will leave traces on the glass.
2. Mix the vinegar and water in the ratio of 1:2, put it into the spray, spray it on the glass and wipe it, it will be very clean.
3. Add 5% Amonia solution or gasoline to the water basin and use it to clean the glass. When the glass is slightly dry, wipe it with a dry cloth. The glass will be spotless, bright and transparent. When cleaning the glass, you can choose different models of window cleaners to see whether it is double-glazed or single-glazed. It is convenient, labor-saving and safe to use the window cleaner.
4. If there is mildew on the surface of the glass, you can adjust the ratio of hydrofluoric acid (HF) to water at 1:8 (note: more than 1:8 will cause damage to the hands), and wipe the glass. Note: Corrosion protection must be done well, and the skin should not be in contact with HF, otherwise it will be severely corroded! After wiping the glass, wipe it again with clean water, and finally wipe the glass dry.





