How to choose the oil pump

Jul 07, 2020 Leave a message

A. Choose the pipe diameter reasonably. The pipe diameter is large. Under the same flow rate, the liquid flow speed is small, and the resistance loss is small. However, the price is high and the pipe diameter is small, which will cause the resistance loss to increase sharply and increase the pressure of the selected pump. With the increase of belt power, the cost and operating expenses are increased. Therefore, it should be considered from the perspective of technology and economy.


B. Valves and check valves must be installed on the discharge side of the pump. The valve is used to adjust the working point of the pump, and the check valve can prevent the oil pump from reversing when the liquid flows back.


C. The pipeline layout should be as straight as possible, minimize the accessories in the pipeline and minimize the length of the pipeline. When turning is necessary, the bending radius of the elbow should be 3 to 5 times the diameter of the pipeline, and the angle should be greater than 90 ℃.


D. The discharge pipe and its pipe joints should consider the maximum pressure it can withstand.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry