By comonomer type, LLDPE is mainly divided into 3 copolymers: C4 (butene-1), C6 (hexene-1) and C8 (octene-1). Among them, butene copolymer is the largest LLDPE resin produced in the world, while hexene copolymer is currently the fastest growing LLDPE variety. In LLDPE resins, the typical amount of comonomer is 5% to 10% by weight, with an average amount of about 7%. Metallocene-based LLDPE plastomers (mLLDPE) have an average comonomer content that is more than 3 times that of conventional LLDPE.
At the end of 1984, the then United Carbon Company introduced the production of hexene copolymer LLDPE, followed by Exxon, Mobil,and other companies. Dow Chemical (Dow Chemical Company) almost exclusively uses octene as a comonomer in its low-pressure solution process, and Canada's NOVA (Nova Chemical) also mostly uses octene in its medium-pressure solution process. Octene copolymer LLDPE resin has slightly better strength, tear resistance and processability, while hexene copolymer and octene copolymer resin have little difference in performance. At present, the main manufacturers of hexene LLDPE resins are ExxonMobil Chemical (ExxonMobil Chemical Company), Eastman Chemical (Eastman Chemical Company), Equistar (Equal Star Company) and Chevron Phillips (Chevron Phillips Chemical Company), etc. In addition, Dow Chemical (Dow Chemical Company), Basell (Basel Company), Innovene (Yi Nuo Company), Samsung Total (Samsung Total Company), etc. also produce hexene LLDPE.
Compared with the commonly used butene comonomers, LLDPE produced with hexene and octene as comonomers has better properties. The biggest use of LLDPE resin is in the production of films. The films and products made of LLDPE resin produced with long-chain α-olefins (such as hexene, octene) as comonomers have good tensile strength, impact strength, tear strength, Puncture resistance, environmental stress crack resistance and many other aspects are superior to LLDPE resins produced with butene as a comonomer. Since the 1990s, foreign PE manufacturers and users have tended to replace butene with hexene and octene. It is reported that using octene as a comonomer, the resin performance may not be further improved than hexene copolymerization, and the price is more expensive. Therefore, the current trend of major foreign LLDPE manufacturers to use hexene to replace butene is more obvious.






